Power supply unit

Protective conductor connection bracket to include steel and aluminium device installation trunking, service poles and system components of underfloor duct systems in the protective measure. Clamping area: 2 x 1.5−4 mm²..

Cover plate as blanking cover...

Cover plate to install a double Modul 45 socket or equipable with two Modul 45 devices. Note: Observe VDE regulation...

Cover plate to install a double Modul 45 socket or equipable with two Modul 45 devices. Note: Observe VDE regulation...

Knotted chain made of pre-copper-plated steel, nickel-plated, according to DIN 5686. Max. tensile force: 800 N. Note: Specify the required chain length during ordering...

Tension spring for VH/VHF power supply units, with German eyelet. Fmax.= 100 N L0 = 200 mm Ln = 500 mm (for Fmax.) Material: VA ø 3.0 mm..

Cover plate with a Ø 45 mm opening for the installation of one extension socket (type ASD-...) with 38 mm fastening track and a Ø 60 mm opening for the installation of one CEE socket 16/32 A with 60 mm fastening track, including 8 screws for fastenin..

Cover plate with a Ø 70 mm opening for the installation of 1x CEE socket 16/32 A with 60 mm fastening track, including 4 screws for fastening the device...

CEE socket with 60 mm fastening track, 3-pin + N + PE, 400 V, 16 A, 6 h...

CEE socket with 60 mm fastening track, 3-pin + N + PE, 400 V, 32 A, 6 h...

Empty housing with suspension lug and grip hook, for the installation of eight electrical resources, with included partition. Without cover plates. - Housing in graphite black, RAL 9011 - Cover plates in rape yellow, RAL 1021...

Positioner for variable height adjustment of a VH power supply unit, support load between 0.5 and 6.0 kg, maximum cable draw-out 1.5 m...

Empty housing with 1 m pipe 1/2" and connection for compressed air hose 13 x 3.5 mm and 2-way distributor 1/2". With suspension lug and grip hook, for the installation of four electrical resources, with included partition. Without cover plates. ..

Housing equipped and prewired, with 1 m pipe 1/2" and connection for compressed air hose 13 x 3.5 mm and 2-way distributor 1/2", with suspension lug, grip hook and four cover plates. Equipped as follows: 4 x single protective contact sockets 16 ..

Empty housing with 1 m pipe 1/2" and connection for compressed air hose 13 x 3.5 mm and 2-way distributor 1/2". With suspension lug and grip hook, for the installation of electrical resources, with included partition. Without cover plates. - Ho..