Anchor

Bolt tie BZ for the anchoring of medium-duty to heavy-duty loads, both in cracked and non-cracked concrete. It combines high approved loads with small edge distances and axial spacings...

Required minimum screw length = anchor length + component thickness + 1 x screw Ø. Withdrawal force applies to wood screws of the largest screw diameter, required safety values must be taken into account...

Hardened steel, electrogalvanised with M6 x 8 mm thread...

Knock-in anchor: steel, electrogalvanised and transparently passivated...

Knock-in anchor for Quick clips type 2955. Knock-in anchor: steel, tempered, electrogalvanised and transparently passivated...

Areas of application: full brick, concrete, wood. Ideally suited for areas exposed to high temperatures...

Flattener for OBO anchors 903 with M6 thread...

Impact tie for single fastening of non-load-bearing systems in non-cracked concrete as well as for multiple fastening in cracked and non-cracked concrete. Tested to fire protection standards, fire resistance class R 120 according to European Techni..

With threaded rod, washer and hexagonal nut; brass axle...

Bolt tie for direct mounting without additional anchors in cracked and uncracked concrete and masonry. M6 connection thread for fastening clips with threaded foot. Construction product tested according to EAD and CE mark, with European Technical Ass..

The nail anchor N-K can be used for multiple fastenings of non-load-bearing systems and in cracked and non-cracked concrete, thereby combining the benefits of a bolt tie with even easier mounting. The nail anchor only needs to be hammered into the dr..

Including nut and large washer. The universal heavy-duty fastening for stressed concrete, hollow steel profiles, metal sheets and plates. Use: heating, ventilation and air conditioning technology, cooling systems, sprinkler systems, pipes, cable tr..

Bolt tie BZ for the anchoring of medium-duty to heavy-duty loads, indoors and outdoors, both in cracked and non-cracked concrete. It combines high approved loads with small edge distances and axial spacings...

Bolt tie BZ for the anchoring of medium-duty to heavy-duty loads in areas with highly corrosive impacts, both in cracked and non-cracked concrete. It combines high approved loads with small edge distances and axial spacings...