• For attaching to steel structures or bolting to earthing fixed points
• For attachments: Round conductor Rd 8-10 and flat conductor FL30 x 3.5
• 2x attaching holes Ø 11 mm
• 1x attaching hole Ø D mm..
• For T, cross and parallel connectors
• Quick installation using hexagonal bolt M10 x 30, high-grade stainless steel
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)..
• With 1 Fix-Kontakt clamping bolt, nut and serrated washer
• With pre-mounted pressure trough
• Corresponds to the requirements of VDE 0185-305 (IEC 62305)..
• For T, cross and parallel connectors
• Quick installation using hexagonal bolt M10 x 30, high-grade stainless steel
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)..
• With fix contact clamping screw, nut and serrated washer
• With bore hole 10.2 mm
• With pre-mounted pressure piece, die-cast zinc
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)..
• With Ø 11 mm fastening hole
• 2 hexagonal bolts M6 x 12, bolts made of hot galvanised steel or of VA
• Clamping block made of die-cast zinc or copper-plated die-cast zinc..
• Adjustable for pipe diameter of 60−130 mm
• With 2 connection holes Ø 7 mm
• With 1 connection hole Ø 9 mm
• With 1 connection hole Ø 11 mm
• Incl. hexagonal bolt M6 x 20 and M6 nut..
• For T, cross and parallel connectors
• Quick installation using hexagonal bolt M10 x 30, high-grade stainless steel
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)..
• For T, intersection and parallel connections with adapter plates
• Quick mounting using an M10 x 30 bolt, made from rustproof stainless steel
• With sprung washer to DIN 137
• Corresponds to the requirements of VDE 0185-305 (IEC 62305)..
• Meets the requirements of VDE 0185-305-3 (IEC/ EN 62305-3)
• For round conductors, fit: Rd 8-10 x Rd 8-10
• With adapter plate
• Mounted with 4 hexagonal bolts M6 x 20 and 4 hexagonal nuts M6..
• Plate thickness to 5 mm
• For conductor routing transverse and longitudinal to plate
• With 4 hexagonal bolts M6 x 12
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
• 271 Cu: with hexagonal bolts stainless steel (VA)..
• With 2 attaching holes Ø 11 mm
• Installed with connector (single-piece) type 5001 DIN-FT
• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)..