Tested according to EN 60998.
Screwless terminal to connect electrical conductors. The type of conductor can either be flexible, multi-wire or rigid.
If rigid conductors are used, an opening of the release lever is not necessary. The conductor can ..
Tested according to EN 60998.
Screwless terminal to connect electrical conductors. The type of conductor can either be flexible, multi-wire or rigid.
If rigid conductors are used, an opening of the release lever is not necessary. The conductor can ..
Tested according to EN 60998.
Screwless terminal to connect electrical conductors. The type of conductor can either be flexible, multi-wire or rigid.
If rigid conductors are used, an opening of the release lever is not necessary. The conductor can ..
Brass terminals, steel screws, galvanised and blue passivated, 12-pin, individual terminals detachable.
Captive upwards screw.
Nominal cross-section 4 mm².
Rated voltage 450 V.
Nominal current 32 A.
Max. attachment each side: 4 mm² single-wire ..
Tested according to EN 60998.
Brass terminals, steel screws, galvanised and blue passivated, 12-pin, individual terminals detachable.
Captive upwards screw.
Nominal cross-section 6 mm².
Nominal voltage 450 V.
Nominal current 41 A.
Max. attachme..
Tested to EN 60998.
Steel terminals, steel screws, electrogalvanised, 12-pole, individual terminals detachable from strips using "twist'n'pull".
Captive upwards screw.
Max. approved ambient temperature to EN 60998: –5 to +80 °C.
Nominal cross-sec..
Tested to EN 60998.
Steel terminals, steel screws, electrogalvanised, 12-pole, individual terminals detachable from strips using "twist'n'pull".
Captive upwards screw.
Max. approved ambient temperature to EN 60998: –5 to +80 °C.
Nominal cross-sec..
Neutral conductor connection terminal with 7 terminals up to 16 mm².
Clamping rail, brass, steel screws, electrogalvanised and transparently passivated, for snapping onto 35 mm hat rails to DIN EN 60715 - previously DIN EN 50022 - (transverse) or fl..
Protective conductor connection terminal with 7 terminals up to 16 mm².
Clamping rail, brass, steel screws, electrogalvanised and transparently passivated, for snapping onto 35 x 7.5 mm hat profile rails to DIN EN 60715 (previously DIN EN 50022) (tr..
Tested to EN 60998.
Brass terminals, steel screws, electrogalvanised and transparently passivated, 12-pole, individual terminals detachable from strips.
Captive upwards screw.
Max. approved ambient temperature to EN 60998: –5 to +80 °C.
Nominal c..
Tested to EN 60998.
Brass terminals, steel screws, electrogalvanised, 12-pole, individual terminals detachable from strips.
Captive upwards screw.
Max. approved ambient temperature to EN 60998: –5 to +80 °C.
Nominal cross-section 35 ÷ mm².
Nomi..
Tested according to EN 60998
Screwless terminal to connect single-strand cables.
Nominal cross-section:
3 x 0.5 mm² to 2.5 mm² single-wire conductors
3 x 1.5 mm² to 2.5 mm² rigid, multi-wire conductors
Rated voltage 450 V
Rated current 24 A
S..
Screwless terminal to connect single-strand cables.
Nominal cross-section:
8 x 0.5 mm² to 2.5 mm² single-wire conductor
8 x 1.5 mm² to 2.5 mm² rigid, multi-wire conductor
Rated voltage 450 V.
Rated current 24 A.
Stripping length: 8–9 mm.
Insp..
Sorted in colours black, brown, blue and yellow-green.
Terminals made of brass, screws of steel, galvanised and transparently passivated, 12-pole, strip separable into individual terminals, open on both sides.
Captive upwards screw.
Nominal cross-..
Protective conductor connection terminal with 7 terminals up to 16 mm².
Clamping rail, brass, steel screws, electrogalvanised and transparently passivated, for snapping onto 35 x 7.5 mm hat profile rails to DIN EN 60715 (previously DIN EN 50022) (tr..
Neutral conductor connection terminal with 12 terminals up to 16 mm².
Clamping rail, brass, steel screws, electrogalvanised and transparently passivated, for snapping onto 35 mm hat rails to DIN EN 60715 - previously DIN EN 50022 - (transverse) or f..
29 724.88 грн.
Лічильники електроенергії!
Широкий асортимент продукції!. Безкоштовна доставка за 1-2 дня!